How to chipless firmware Epson P400, P405, P407, P408, PX7V2
INKCHIP Solution For Chipless Printing Instructions for updating the printer firmware in chipless, method 8 Compatible Epson Printer Models: Epson: SC-P400; SC-P404; SC-P408; PX7V For updating the printer firmware into a chipless one you need: 1. INKCHIP Firmware Program compatible with your printer model. 2. INKCHIP Activation Program compatible with your printer model. 3. A computer with a Windows operating system and Internet access. 4. USB cable 5. INKCHIP activation key. STEP 1. Download INKCHIP Firmware and INKCHIP Activation for your printer model from inkchip.net. Unpack the ZIP archives of these programs. STEP 2. Turn off your printer using the power button and wait at least one minute. STEP 3. Connect the printer to a Windows computer using a USB cable. STEP 4. Enter the printer in firmware mode. To do this, simultaneously hold down the following buttons on the control panel: “ROLL” (1) + “DROP” (2) + “CANCEL” (3) + “ON” (4) . Hold them for 3-5 seconds until all indicators on the printer control panel light up and release all buttons. Please note that all four indicators should light up. If not all indicators light up - this is the wrong mode, turn off the printer and repeat the procedure. STEP 5. Launch the INKCHIP Firmware program on your computer.
– Fix Errors: P400, P405, P407, P408, PX7V2 ink out, ink cartridge is low, ink cartridge near end, ink cartridge is empty, incompatible ink cartridge.
– Modify printers Firmware -> printer will not require Ink Cartridges (IC Chips on cartridges) anymore. You will not need to reset ink chips or replace them if they are broken. Guaranty 100% money back if it does not work !!!