INKCHIP Solution For Chipless Printing Instructions for updating the printer firmware in chipless, method 12 Compatible Epson Printer Models: XP-830; XP-960; EP-978A; EP-808; EP-979 For updating the printer firmware into a chipless one you need: 1. INKCHIP Firmware Program compatible with your printer model. 2. INKCHIP Activation Program compatible with your printer model. 3. A computer with a Windows operating system and Internet access. 4. USB cable 5. INKCHIP activation key. STEP 1. Download INKCHIP Firmware and INKCHIP Activation for your printer model from inkchip.net. Unpack the ZIP archives of these programs. STEP 2. Turn off your printer using the power button and wait at least one minute. STEP 3. Connect the printer to a Windows computer using a USB cable. STEP 4. Enter the printer in firmware mode. To do this, simultaneously clamp a point on the touch panel (marked in Figure 1) and the “POWER BUTTON” (2) . Hold them for 3- 5 seconds until “Firmware Update Mode” or “Program Update Mode” appears on the display (d epending on the specific model) and release all buttons. Please note that the inscription on the display must be in white font. If the text is red, this is an incorrect mode, turn off the printer, and then repeat the procedure for entering the printer in firmware mode. 2 1
– Fix Errors: Epson XP-830 ink out, ink cartridge is low, ink cartridge near end, ink cartridge is empty, incompatible ink cartridge.
– Modify printers Firmware -> printer will not require Ink Cartridges (IC Chips on cartridges) anymore. You will not need to reset ink chips or replace them if they are broken. Guaranty 100% money back if it does not work !!!