Epson WF C869RA,C869RE Service Repair Manuals Page 201-250

EPSON WF-C869Ra/WF-C869R Revision E Troubleshooting Fax Troubleshooting 201 Confidential 6.4.2.2 Protocol trace A detailed report for the previous sent or received fax. Settings are available for Manual Print, or Auto Print after communication by changing the RAM Edit. If a communication does not start until send/receive operation (when it did not enter Phase B after Phase A), the log is displayed as a blank space. Output Procedure Output Setting Output Sample Manual [FAX] [(Menu)] [FAX Report] [Protocol trace] = Select [Print] Auto Use Fax parameter Setting mode #006 to automatically print the log for every communication. See “Communication Protocol trace” in Service Parameter List. Save / Print error only Use FAX parameter setting mode #005 to save and print error communication only. See ”Communication Protocol trace” in Service Parameter List. Auto Use Fax parameter Setting mode #007 to save one log/ save three log/ print the Protocol trace. See “Communication Protocol trace” in Service Parameter List. (1) Title etc. Same as FAX log (2) Name, Fax Sender’s name registered to the product (3) Receipt No. ~ Communication result Logs of the received faxes. Description is same as Fax log. (4) DIS(DTC) / DCS Refer to “How to use DIS(DTC) / DCS” (p.258) (5) Command / Response Log Refer to “How to use Command/Response log” (p.260) . (1) (2) (3) (4) (5)
Page 1 of 50

Epson WF C869RA Service Repair Manual Page 201-250
Epson WF C869RE Service Repair Manual Page 201-250

Leave a Reply