Epson WF C5790, WF C5790A, WF C5710 ET 8700, WF C5210, WF C5290, WF C5290A Service Manuals Page 401-450

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A Disassembly/assembly Disassembly/Reassembly Procedures 401 Confidential Ink Supply Tube 1. Set the ink leak measurement jig to the ink tube connector of the Print Head. 2. Set the Ink Supply Tube to the Printhead. 3. After ink charging, follow the instructions on the Ink leak check (p.563) to remove the LEAK TESTER SHEET FRONT/REAR, then perform Leak Check Judgement. The smoked face of ink leak measurement jig is put toward the upside. When installing the Ink Supply Tube, make sure to tighten the screws using a torque driver with the specified torque. Screw tightening torque: 0.33±0.02N m Front side LEAK TESTER SHEET FRONT The smoked face is put toward the upside. LEAK TESTER SHEET REAR Rear side LEAK TESTER SHEET REAR LEAK TESTER SHEET FRONT Ink Supply Tube After ink charging, follow the instructions on the Ink leak check (p.563) to remove the LEAK TESTER SHEET FRONT/REAR, then perform Leak Check Judgement.
Page 1 of 50

Epson WF C5790 Service Repair Manual Page 401-450
Epson WF C5790A Service Repair Manual Page 401-450
Epson WF C5710 Service Repair Manual Page 401-450
Epson ET 8700 Service Repair Manual Page 401-450
Epson WF C5210 Service Repair Manual Page 401-450
Epson WF C5290 Service Repair Manual Page 401-450
Epson WF C5290A Service Repair Manual Page 401-450

Leave a Reply