Epson WF C5790, WF C5790A, WF C5710 ET 8700, WF C5210, WF C5290, WF C5290A Service Manuals Page 301-350

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A Disassembly/assembly Disassembly/Reassembly Procedures 301 Confidential Peel off the CRCM FFC 1. Peel off the CRCM FFC. 2. Peel off the CRCR FFC Sheet. A9 D9 B9 C9 CRCM FFC CRCM FFC Sheet Double-sided tape Double-sided tape Double-sided tape Double-sided tape Plate 1. Remove the two screws (S6: ), and remove the Plate. When installing the Ink Supply Tube to the RIPS Unit, make sure to tighten the screws using a torque driver with the specified torque. Screw tightening torque: 0.59±0.01N m A10 D10 B10 C10 Plate No. Screw Type S6 C.B.SCREW-2.6X18-F.ZN-3C
Page 1 of 50

Epson WF C5790 Service Repair Manual Page 301-350
Epson WF C5790A Service Repair Manual Page 301-350
Epson WF C5710 Service Repair Manual Page 301-350
Epson ET 8700 Service Repair Manual Page 301-350
Epson WF C5210 Service Repair Manual Page 301-350
Epson WF C5290 Service Repair Manual Page 301-350
Epson WF C5290A Service Repair Manual Page 301-350

Leave a Reply