Epson WF C5790, WF C5790A, WF C5710 ET 8700, WF C5210, WF C5290, WF C5290A Service Manuals Page 101-150

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A Troubleshooting Troubleshooting procedure 101 Confidential CR ERROR (1) Error name CR PID driving time error (error code: 000020) CR load position driving time error (error code: 000030) Cause The driving time of the motor exceeded the set time. Suspected cause CR Motor cable disconnection or contact failure Main Board failure Troubleshooting Step Check and measure Yes No 1 Visually check the CR Motor cable. Check the CR Motor cable to make sure that there is no error (disconnection/ contact failure). Go to step 2 Correctly insert the motor cable. Replace the CR Motor if the motor cable is disconnected. 2 Replace the Main Board Assy. Does the error occur after replacing the Main Board Assy? Contact the EPSON Service Department. End
Page 1 of 50

Epson WF C5790 Service Repair Manual Page 101-150
Epson WF C5790A Service Repair Manual Page 101-150
Epson WF C5710 Service Repair Manual Page 101-150
Epson ET 8700 Service Repair Manual Page 101-150
Epson WF C5210 Service Repair Manual Page 101-150
Epson WF C5290 Service Repair Manual Page 101-150
Epson WF C5290A Service Repair Manual Page 101-150

Leave a Reply