EPSON WF-6090,WF-6530, WF-6590 Series Service Manual Page 121-140

EPSON WF-6590/WF-6530/WF-6590 Series Revision C DISASSEMBLY/REASSEMBLY Disassembly and Assembly Procedure 125 Confidential 15. Remove the CR Support Spring. Figure 2-124. Removing the CR Support Spring at the home side 16. Remove the screw (S16), and remove the CR Support Plate. Figure 2-125. Removing the CR Support Plate at the home side 17. Remove the plastic ring, and remove the CR bearing and parallel pin. Figure 2-126. Removing the CRbearing and parallel pin CR support supring CR Support Plate „ Set the CR Bearing with “6” exactly on the bottom. „ Align the marking on the Right PG Adjust lever with the rib on the frame. CR bearing Plastic ring Parallel pin 6 CR Bearing Marking Rib Right PG Adjust Lever
Page 1 of 20

Epson WF-6090 Series Service Manual Page 121-140
Epson WF-6530 Series Service Manual Page 121-140
Epson WF-6590 Series Service Manual Page 121-140