EPSON WF-6090,WF-6530, WF-6590 Series Service Manual Page 101-120

EPSON WF-6590/WF-6530/WF-6590 Series Revision C DISASSEMBLY/REASSEMBLY Disassembly and Assembly Procedure 105 Confidential † WF-6590 Series 1). Remove the Upper Housing Assy. (P.78) 2). Remove the Panel Housing Front. (P.79) 3). Remove the Panel Assy. (P.80) 4). Remove the Panel Lower Front Cover. (P.81) 5). Remove the Right Upper Front Cover. (P.82) 6). Remove the Stacker Assy. (P.77) 7). Remove the Cassette Assy. (P.203) 8). Remove the Front Cover Microswitch. (P.82) 9). Remove the Front Housing. (P.84) 10). Remove the Middle Housing. (P.86) 2. Disconnect the FFC from the connector of the CSIC Board. 3. Disengage the six hooks, and CSIC Board Cover. Figure 2-91. Removing the CSIC Board Cover 4. Disconnect the FFC from the four connectors of the CSIC Board. 5. Remove the four screws (S11), and remove the CSIC Board. Figure 2-92. Removing the CSIC Board Hook FFC CSIC Board Cover Connector Hooks Hooks Set the Ferrite Core on the position shown below. CSIC Board Cover Image after installation Ferrite Core FFC S11 Connector Connector
Page 1 of 20

Epson WF-6090 Series Service Manual Page 101-120
Epson WF-6530 Series Service Manual Page 101-120
Epson WF-6590 Series Service Manual Page 101-120